EXHAUST EXTRACTORS
Vehicle exhaust extraction for cars, trucks, buses, fire trucks, ambulances and other emergency vehicles
Exhaust emissions from a cold-start engine can reach toxic levels within a closed building. Even though the vehicles are run only a short time indoors and with open doors, the odorless carbon monoxide (vehicle exhaust) builds up in the building. Without control and removal of the vehicle exhaust fumes they can lead to worker illness, heavier facility maintenance and damage to the sensitive electronics of diagnostic and servicing equipment in the workshop.
Exhaust extraction at source
The most effective method of capturing and removing of vehicle exhaust fumes is capture at source. Capturing the vehicle exhaust gases provides a safer and more pleasant working environment.
Exhaust Hose Reel 865
Electric motor driven or spring recoil exhaust extraction of vehicle diesel fumes
The best solution in workshops with a high ceiling, where overhead cranes etc. have to be considered, or where high vehicles must pass. Operated via a hand unit either an IR control or pendant control. A receiving eye on the reel shows the status of operation. Electronic limit switches reduce the risk of malfunction and unnecessary wearing of the hose. Fan start/stop is automatically controlled. Mounting of fan on reel is possible.
Convenient and safe operation
Automatic fan operation
Settings for limit switches made from floor level
Compact, modern design
Quick & easy installation reduces cost
Click for Technical Specifications
ALU EXHAUST EXTRACTION RAIL SYSTEM
Ideal "on rail" vehicle exhaust extraction system for inspection centers or vehicle manufacturers
ALU 150/250 is an advanced exhaust rail system for high frequency use, developed to meet the requirements from vehicle manufacturers and inspection centers. The ALU 150/ 250 offers a large number of features, such as automatic return of extraction units on a separate track, automatic disconnection of nozzles, and motorized hose hoists, make nozzle connection the only manual task.
Combinations with automatic return in the suction rail can also be used in heavy goods vehicle installations where only on vehicle is served at the time.
High quality components
Two standard rail sizes
Complete program of accessories for extraction units
Click for Technical Specifications
SINGLE AND TWIN EXHAUST EXTRACTOR HOSE
Single Exhaust Extractor is a reliable and functional solution for all types of stationary vehicles.
Available with balancer or a cord for manual hose suspension. The balancer automatically raises the hose and nozzle after disconnection, and keeps them lifted at all times. Models for high temperature application are available. Very easy to install, using the included bracket. Prepared for fan mounting on bracket. Twin Exhaust Extractor removes exhaust fumes from two vehicles at the same time, or from vehicles with twin exhaust pipes. Very easy to install, using the included bracket. Prepared for fan mounting on bracket.
The Twin Extractor removes exhaust fumes from two vehicles at the same time, or from vehicles with twin exhaust pipes. It is very easy to install, using the bracket included. Prepared for fan mounting on bracket.
Easy handling of exhaust hose
Takes up very little space
Low cost solution
Easy to install
Click for Technical Specifications
TRACKARM WALL-MOUNTED EXHAUST EXTRACTOR
Nederman's wall-mounted Trackarm is designed for heavy stationary vehicles.
It is a solution where crane bridges, height of ceiling, etc. make ceiling mounting of other systems difficult. The horizontal hose is compressible, and fixed to a 180° pivoting arm. The balancer keeps the hose lifted and stretched at all times. This makes the Trackarm System very flexible to use and easy to operate. The Trackarm System consists of: wall bracket, extraction arm, horizontal hose, vertical hose, trolley, balancer and nozzle.
Simplifies handling of large and heavy hoses
Reaches exhaust pipes anywhere within an area of 76 m2 (818 ft2)
Safe operation with safety coupling
For large airflow requirements
Can be moved out of the way when not in use
Click for Technical Specifications
TOUCHLESS EXHAUST EXTRACTOR
Extracts exhaust fumes without having to touch the car
An easy to handle system for all types of cars. It consists of a basic rail system and our Touchless Extraction Unit. The Nederman Touchless Exhaust Extractor has very high extraction efficiency. One extraction unit can serve several work bays. Extraction units are easy to move, thanks to light-weight material and ball bearing wheels. We designed this to minimize risk of damaging the cars. Two units serve cars with twin exhaust pipes.
Touchless – no scraping on the car
Universal – for all types of exhaust pipes
Versatile – for cars on the floor or lifted
Ergonomic – easy to maneuver and move between workstations
Click for Technical Specifications